Analogue telephone lines

An analogue telephone line enables, via an installed wall socket, the connection of an analogue device, such as a telephone, modem or fax machine, to the telephone network. Unlike the digital ISDN system or a Voice-over-IP (VoIP) connection, the signals from an analogue terminal are directly transferred to the telephone network in analogue form. Voice information is translated from sound waves into electromagnetic signals of a similar frequency. As a rule, an analogue telephone line only requires a traditional two-wire cable connection.

Dialling using an analogue telephone line

With an analogue telephone line, the information about the dial-up connection, as well as the voice information, are transferred down telephone line in parallel, so special dialling procedures are used. The older method is so-called pulse dialling, which dates from the time of switching centres with rotary dials. The individually transmitted pulses turn the dial into a certain position that ultimately establishes the connection. The pause between the pulses ensures the correct control of the various rotary dials.

Current analogue telephone lines use the system known as multi-frequency dialling (DTMF). Each key tone produces two defined frequencies (DTMF - Dual Tone Multi Frequency), which initiate the dialling process at the telephone switching station.

Data transfer on an analogue telephone line

Since analogue telephone lines only allow the transmission of analogue signals, to transfer data, it is necessary to convert digital data into analogue information. This task is performed by a modem (modulator-demodulator). At the transmission end it turns the digital signal into an analogue one and the, at the receiving end, back into digital again. Owing to the limited frequency spectrum in the analogue telephone network the maximum data transmission bandwidth is limited and not comparable to other transmission methods, such as DSL.

Analogue phone lines and modern cloud telephone systems

Even though modern cloud-based telephone systems that use Internet Protocol (IP) and function completely digitally by transmitting the voice information using VoIP, it is still possible to connect conventional analogue devices to them. To enable this, adapters are used, which are connected to the network and translate the analogue signals into VoIP data. Often, these adapters are integrated into access routers, allowing multiple analogue devices to be connected at the same time.

Further information

Virtual fax machine

With Cloudya, you can send and receive faxes.

  • Reach each employee directly via a personal fax number
  • Share virtual fax machines with a user group
  • Receive faxes in PDF format by email
  • T.38 fax…
Read more

Voice over Internet Protocol (VoIP)

Voice over Internet Protocol, ook wel IP-telefonie genoemd, is een communicatiemethode om te bellen via een breedbandinternetverbinding als alternatief voor gewone gesprekken via een analoge telefoon…

Read more

Integrated Services Digital Network (ISDN)

In telecommunications technology, the abbreviation ISDN stands for the technical term "Integrated Services Digital Network" and refers to a digital standard for telephone networks. As the name…

Read more