C. Portal settings
This section describes the first steps, how to insert and administrate a Mitel UC360 as a SIP unprovisioned device.
SIP accounts will be registered on the administration portal as unprovisioned SIP device by the support team. You will find the SIP accounts under Elements / Devices. Please contact the support team.
| No. | Description | Picture |
| 1. | Please enter the portal.nfon.com with your userID and password. | |
| 2. | Add a new device, detailed description here. |  |
| 3. | [1.] Select Unprovisioned Device. [2.] Select SIP Unprovisioned Device. |  |
| 4. | A new window appears, [1.] please enter the MAC address of your Mitel UC360 device (can be found on the back side of the device!). Enter the MAC address without " - " signs. Please note: [2.] Enter the Site address, too!! This is the location where the device is placed! It is necessary for EMERGENCY CALLS! |  |
| 5. | After you have saved your entries, please change to the "TARGETS" area. Please add here a new Target. |  |
| 6. | Add a phone extension. |  |
| 7. | A new window appears, enter here: [1.] Add a name, e.g. Dik Linthout. [2.] Add an extension. [3.] Select new device. |  |
| 8. | [1.] Enter here again the MAC address to select your device. [2.] Once selected, you need to confirm your result. [3.] Select an outbound trunk, if the device needs an external access. |  |
| 9. | All the other settings for this device, e.g. voicemail, are described in the administration portal manual. | |
| 10. | Now your Mitel UC360 is added and set up. For the settings of the UC360 you need the next information: Change to Elements/Devices then: [1.] Enter the MAC address (fast search). [2.] This is your userID for the UC360 settings! [3.] This is your password for the UC360 settings! |  |
| 11. | Now you can change the settings in your Mitel UC360 device. |
