2.2. Touches de fonction & codes

Par le portail de service, vous pouvez occuper les touches de fonction.Pour des informations détaillées, voir manuel portail de service.Vous arrivez vers les touches de fonction (touches virtuelles) du snom 870 en appuyant sur le bouton  sur l'écran de démarrage.

  • A green key indicates an incoming call. Tap on the green key, to pick up the call. Now, you have picked up the call.
csm_C._1.7._Picking_up_a_call_1_a567553e17
  • If the monitored extension is busy, the virtual function key lights up yellow.
csm_C._1.7._Picking_up_a_call_2_72d849e363

À l'aide des codes de commande, il est aussi possible de gérer directement des fonctions de l'installation téléphonique. Les codes suivants s'appliquent :

Code Description
**## Restart devices, only for snom devices!
#+n Use outside line "n" to call the telephone number ("n" replaces the “0” otherwise required to access an outside line)
*1 Start and end voice recording (if this function is enabled for the extension)
*10+profile number Activation of the call forwarding profile
*11+TN Permanent call forwarding to telephone number (TN)
**11 Cancel permanent call forwarding
*12+TN If not available, forward to telephone number (TN)
**12 Cancel call forwarding if no answer
*13+TN If busy, forward call to telephone number (TN)
**13 Cancel call forwarding if busy
*14+TN If not registered, forward to telephone number (TN)
**14 Cancel forward if unregistered
*2+Speed dial Directly dial the extension/telephone number via speed dial
*3 Pick up the last call ringing in the pick-up groupe
*3+EXT Pick up call coming in to the extension (EXT)
*490

Activate call waiting

**490 Deactivate call waiting
*5


If busy, automatic callback activated

**5 If busy, automatic callback deactivated
*55 Specify primary device within a premium extension (Premium Package)
*72+nnnn1 Call skill service nnnn
*73+nnnn1 Call eFax additional costs will occur
*74+nnnn1 Call time control nnnn
*75+nnnn1 Call group nnnn
*76+nnnn1 Call announcement nnnn
*77+nnnn1 Call queue nnnn
*78+nnnn1 Call conference service nnnn
*791

*791            Access voice mail for this extension with password

*791158       Access voice mail for extension 158, with the password for 158!

*11*791       Transfer your calls to your voice mail

*11*791158  Transfer your calls to the voice mail of the extension 158

*792  Access voice mail entering extension number, e.g. for remote enquiry
*80 ‌Activate intercom
‌**80 ‌Deactivate intercom
‌*80+NST ‌Intercom to extension (EXT)
‌*84+nnnn1 ‌Become member of the queue with service ID nnnn
‌**84+nnnn1 ‌Leave queue with service ID nnnn
‌*85 Echo extension
‌*86 ‌Block caller ID (CLIR)
*860 ‌Show main number as telephone number
‌**86 ‌Show telephone number incl.direct dial (CLIP)
‌*87 ‌Subscribe to Skill-set
‌**87 ‌Unsubscribe to Skill-set
‌*9+Project Number Define a project number for outbound calls. (Note: The project number is only valid for the very next outbound call)
Function codes for conference rooms during an active conference.
‌** ‌Help
*2 ‌Activate or deactivate mute.
‌*3 ‌Express your needs.
‌*5 ‌Activate or deactivate mute of all participant.
‌*6 ‌Lock the conference.
‌1) nnnn is the four digit Service ID with leading zeros (0). For example, in a callgroup, IVR, eFax, etc. This means: is the Service ID "1", "0001" must be entered when entering the function code.